How to Clean VELCRO® Brand Fasteners

VELCRO® Brand fasteners provide creative solutions to many of life's daily problems… Only after a while, they tin can be difficult to continue clean.

Despite their usefulness, they can be magnets for hair, fluff and clothing lint and the more than that gets embedded into the fastener, the more than difficult they tin be to close.

Read on to find out how to clean VELCRO® Brand fasteners in order to go along them gripping well-nigh finer.

Easy ways to clean VELCRO® Brand fasteners

Utilize a toothbrush

One of the easiest means to remove fluff from VELCRO® Brand fasteners is to employ a toothbrush. The strong bristles are perfect for brushing out unwanted lint and pilus – lay the VELCRO® Make fasteners flat and brush information technology with brusque, hard strokes to loosen anything that'south stuck between the hooks. Then remove any lint that comes loose with your fingers.

Cleaning VELCRO Brand Fasteners with a Toothbrush

Scrape it with the cutter of a tape dispenser

Hang fire before you throw out any old tape dispensers – the cutting edge is perfect for cleaning VELCRO® Brand fasteners! Simply lay information technology flat and use the cutter of the tape dispenser to rake out any pilus or lint that has got stuck. Then remove anything that comes loose with your fingers.

Pick out the fluff with tweezers

If the hair and lint is deeply embedded into the hooks and loops, you'll need tweezers to get information technology out. This is a time-consuming but effective way to fix VELCRO® Make fasteners that accept lost their stick.

Cleaning VELCRO Brand with Tweezers

Utilize strong tape

If there'southward a lot of lint to remove, you tin remove the bulk of information technology with some strong tape. Make a loop of tape, put information technology effectually your fingers and use information technology to pull out any lint or hair stuck in your VELCRO® Brand fasteners.

Brush it out with a fine-toothed comb

Got a rummage handy? A fine-toothed one is perfect for brushing out unwanted hair. Loosen it with a rummage and then choice it out with your fingers.

Cleaning VELCRO Brand Fasteners with Comb

Utilise another VELCRO® Brand fastener

To remove hair and lint from the hook side of a VELCRO® Brand fastener (i.e. the scratchy side), simply take another hooked piece and rub them together. The clean piece should get together all the unwanted fluff out of the dirty piece.

How to go on VELCRO® Make fasteners clean

Once you've cleaned your VELCRO® Brand fasteners, y'all'll desire to make certain they stay make clean. Here are a couple of easy maintenance tips to aid you out.

When non in use, keep it fastened

The easiest way to terminate unwanted pilus and lint getting stuck in your VELCRO® Brand fasteners is to go on them fastened when they're non in use. If y'all get out them unfastened, you lot're creating a magnet for hair and fluff!

Keep it attached in the wash

If your VELCRO® Brand fasteners are fastened to article of clothing, make certain yous keep them attached when they're in the washing machine or in your laundry basket. This will forbid lint from other clothes sticking to them.

Brush lint out regularly

You'll never be able to completely prevent hair and lint getting stuck in your VELCRO® Brand fasteners but brushing out fluff regularly tin can help to reduce a build-upwardly and proceed your fasteners working finer.

We hope these tips aid you lot keep your VELCRO® Brand fasteners clean and working well! Stay on our blog for more tips or explore our range of VELCRO® Make products here.